touch for navigation

[GBP £ | EUR € | USD $ ]
Cart Total: £ 0.00
Items in Cart: 0
ProductsMy CartCheckoutLogin

CA80-120 : 80mm diameter analogue (0-120) speedo (0-12k) tacho with large digital display

£ 199.99 inc VAT | € 247.99 inc VAT | $ 254.99
CA80-120
Product Images (Click to enlarge)
Product image Product image Product image Product image Product image Product image

ACEWELL ACE-CA080 Digital Dashboard

FEATURES:

  • Simultaneously displays tachometer, speedometer, fuel gauge and bar-graph temperature meter, gear indicator as well as one other digital readout.

  • Backlight can be switched with sidelights as per IVA / MSVA / MOT requirements

  • Warning lamps meet requirements of IVA / MSVA / MOT test

  • Needle tachometer / speedometer to 120mph / km/h or 12000RPM.

  • Needle can be switched between showing speed and RPM

  • Compatible with both car and motorcycle engined vehicles

  • Speed input can connect to included magnet/reed switch sensor or optional cable drive adaptor or directly to many speed sensors fitted to automotive gearboxes

  • Gear indicator calculates gear by comparing speed and RPM on manual gearboxes, so no additional sensors are required

  • 100% water resistant so can be fitted in beach buggies without worrying about rain damage

  • Includes RPM sensing wire, speed sensor, temperature sensor, and generic wiring harness

  • Voltage warning lamp can be configured for the voltages to come on and off to suit any vehicle

  • Programmable Fuel Gauge which can be set for 10-990 ohms resistance for both full and empty so that it can connect to almost any sender.

  • E-Marked for road vehicle use within Europe

  • 80mm diameter main body x 41mm deep with 90mm diameter bezel and 90mm diameter sleeve

  • Top bezel available in chromed plastic / Black CNC Aluminium / Chromed CNC Aluminium

  • Screw on Sleeve available in black plastic / Black CNC Aluminium / Chromed CNC Aluminium

  • Screw on Sleeve to clamp speedometer through a panel with 80mm hole

  • Needle can show RPM or speed in MPH / KM/H

  • Upper line of LCD shows speed in MPH or KM/H


COMPATIBLE WITH GEARBOX SPEED SENSORS

Features

features
  • Analogue Needle Speedometer
  • Digial Speed Readout (SPD)
  • Maximum Speed Display (MAX SPD)
  • Average Speed Display (AVG)
  • Odometer (ODO)
  • Trip Meter
  • Clock
  • Resettable Riding Timer (RT)
  • Non-resettable Riding Timer (TT)
  • Resettable Engine Hour Meter (HRT)
  • Engine Hour Meter (HRTT)
  • Maintenance Reminder
  • Temperature Gauge
  • Temperature Sensors
  • High Temperature Warning Lamp
  • Warning Lamps
  • Gear Indicator
  • Digital Rev Counter
  • Programmable Shift Light
  • Needle Rev Counter
  • Voltmeter
  • Bar Chart Fuel Gauge
  • Backlight
  • Battery Charge Warning
  • Waterproof Computer
  • Waterproof Multipin Plugs
  • Plastic Case
  • CNC Case
  • Enter Odometer Reading When New
  • EMI/EMS Tested CE And E-Marked
  • Vibration (8G) And Mechanical Shock (100G) Tested.

Warning Lamps

warning lamps
Positive switchingNegative SwitchingProcessor controlledLCD symbols

Specifications

specifications
FeaturesSpecification
Model NumberCA80-120
Analogue Needle Speedometer0-120
Digial Speed Readout (SPD)0 - 248MPH / 400Km/h
Maximum Speed Display (MAX SPD)0 - 248MPH / 400Km/h
Average Speed Display (AVG)0 - 248MPH / 400Km/h
Max Speed Sensor Input Frequency7KHz (reed sensor / hall sensor / cable drive / electronic gearbox speed sensors)
Odometer (ODO)0-999,999 km / 0-624,999 miles
Trip Meter2 trips, 0-999 km / 0-625 miles
Clock12 / 24 hour clock, also displayed when ignition is off
Resettable Riding Timer (RT)0 - 99h 59min 59sec
Non-resettable Riding Timer (TT)0 - 9999h 59min
Resettable Engine Hour Meter (HRT)0 - 9999h 59min
Engine Hour Meter (HRTT)0 - 9999h 59min
Maintenance Reminderdistance or hours
Temperature Gaugemaximum 160c / 320f
Temperature Sensors1
Warning Lamps5
Gear Indicator1-8, N
Digital Rev Counter0-20,000 RPM
Needle Rev Counter0-12,000 RPM
Operating Power12v (DC, Negative earth)
Voltmeter8v-18v
Bar Chart Fuel Gauge Input Resistanceoff / reserve / 0-1000 config
BacklightBacklight and power switched independently
Battery Charge WarningUndercharge and overcharge warning
Connector Plugs090 series
Plastic Case Dimensions91mm diameter x 41mm (fits through 80mm diameter hole in dash)
CNC Case Dimensions89.5mm diameter x 41mm (fits through 80mm diameter hole in das
Casechromed plastic / black plastic / chromed CNC / black CNC upper ring
black plastic / chromed CNC / black CNC sleeve
Power Onignition key
Enter Odometer Reading When Newodometer distance can be altered when the number displayed is less than 30km or 18 miles, once this number is exceeded the distance is locked in memory and cannot be altered
Compatible Wheel Size1-3999mm

Included in the kit

included in the kit
  • Head unit
  • Temperature Sensor: optional
  • Mounting Bracket: ACE-Y Stainless steel bracket
  • Mounting Kit: stainless steel nuts, washers, anti vibration washers
  • Speed Sensor: Reed sensor or hall sensor options
  • Mating multipin plugs and cables to solder / crimp into bike wiring (pigtails)
  • Operating Instructions
  • Wiring diagram

Videos

videosACEWELL CA080 analogue needle modea (CA080-120 shown)
ACEWELL CA080 LCD functions (CA080-040 shown)
ACEWELL CA080 Setup menu (CA080-040 shown)
Product Images
(Click to enlarge)
CategoryAcewell Speedometers
Sub-CategoryACE-80mm
Quantity in Stock10

Buy This Product
Base Price
£ 199.99 inc VAT
 
Quantity
Front ring - Bezel
Sleeve
Speed Sensor
Temperature Sensor
[ Back to Products | Send to Friend ]